Heat Exchangers Introduction
Teflon heat exchangers are using United States DuPont (TEFLON), Japan Daikin Corporation (FLON) and other imported
raw materials.
Using advanced tube manufacturing equipment and processing methods, hot-melt welding of tubes and flanges for Assembly
into heat exchangers.
Teflon heat exchanger is applicable for chromium plating, acidic tin plating, zinc plating, electroless plating, anodizing and heating,
cooling, evaporation and
condensation of chemical, pharmaceutical and food's industry's corrosive liquids.
Titanium tube heat exchanger and external cycle heat exchanger are using TA2 material, purity up to 99.7%,
high corrosion resistance,
applicable to acid liquid heating and cooling.
316(316L) tube heat exchanger and external cycle heat exchanger are using high quality stainless steel materials.
Heat Exchangers Features
1, Heat exchanger with PFA, FEP, PVDF pipe materials, has better performance than polytetrafluoroethylene (PTFE) material, and high
thermal stability, flexibility, transparency and resistance to tearing.
2, Applicable temperature range -180~260C
3, Excellent temperature resistance, be bent into any shape, bending radius shall be ≥ 150mm
4, Excellent electrical insulation, non-stick and Aging resistance. No matter what corrosive gases, liquids or exposure to bad air,
aging resistance can be up to 10 years.
5, To Teflon, titanium, 316Ll heat exchanger, tubes cluster together. Small diameter and large number of tubes, large area of heat exchange,
high pressure and heat dispersion, small size, light weight, easy installation and maintenance.
Heat Exchangers Constructions
1, tube heat exchanger in tank and reactor
2, external cycle shell and tube heat exchanger
3, Anti-static double-pipe heat exchanger
Heat Exchangers Specifications
1, teflon heat exchanger
Tube diameter is from 3 to 12mm. Tubes assembled with flanges at both ends. Flanges
are inlet and outlet of heat exchanger. Outside of tubes is PP, PVC, PTFE, PVDF
framework to prevent from damage of impact.
2, titanium, 316L heat exchanger
Tube diameter is from 12 to 50mm.
Other Applications
Precious Metal Deposition
Engineered to meet the most stringent requirements, accurate and reliable Heaters in Precious Metals' Deposition reduce materials waste. Low ripple Power Supplies provide clean and smooth direct current (DC), precision results while also saving on materials.
Products For General Metal Finishing
MOTS SINGLE - BOTTOM, DERATED
Derated, low watt density, L-shaped, bottom, metal over the side Immersion Heater. Single or Three phase. Three phase. 500-6000 watts, 120-480 volts.
MOTS TRIPLE - L SHAPED
L-shaped, bottom style metal over the side heater. Three phase. Single or three phase. 3000-36000 watts, 200-600 volts.
9HX SERIES
Low watt density, 9 element fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. Three phase. 3000-18000 watts, 208-600 volts.
6HX SERIES
Low watt density, 6 element fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. Three phase. 2000-12000 watts, 208-600 volts.
Anodizing
Anodizing is an electrochemical process of converting a metal surface into an oxide layer. Mainly aluminum is used for anodizing, although other nonferrous metals, such as titanium and magnesium, can also be anodized. The metal part is connected as the anode and immersed into an acid electrolyte bath, where an electric current is applied to grow the oxide layer from the piece. The resulting surface finish will provide functional properties as corrosion-resistance and durability, as well as decorative properties. Surplus heaters provide beautiful, precise finishes. Surplus power supplies deliver high current, high accuracy, and high energy efficiency to meet a modern anodizing process's requirements.
Products For Anodizing
MOTS SINGLE - BOTTOM, DERATED
Derated, low watt density, L-shaped, bottom, metal over the side Immersion Heater. Single or Three phase. Three phase. 500-6000 watts, 120-480 volts.
MOTS TRIPLE - L SHAPED
L-shaped, bottom style metal over the side heater. Three phase. Single or three phase. 3000-36000 watts, 200-600 volts.
6HS SERIES - TUBULAR
Over the side, 6 element, tubular heater. Three phase. 6000-21000 watts, 208-600 volts.
MOTS TRIPLE - DEEP TANK
Deep tank, metal over the side heater. Three phase. Heats up to 300°F (149°C). Single or three phase. 18000-54000 watts, 208-600 volts.
6HX SERIES
Low watt density, 6 element fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. Three phase. 2000-12000 watts, 208-600 volts.
3HXOL SERIES
Low watt density, 3 element, bottom heater. Fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. 3000-18000 watts, 208-480 volts.
HXF SERIES
Low-watt density, spiral heater. Fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. 500-6000 watts, 120-600 Volts.
HX SERIES
Low watt density, spiral. Fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. Single phase. 500-9000 watts, 120-600 volts.
3HX SERIES
Low watt density, 3 element heater. Fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. Three phase. 1000-6000 watts, 120-600 volts.
